Fokke van Saane answered a question 21 hours, 49 minutes ago
If you like i can have a look at your clips if you send me some in which the problem occurs. And it would be good if you tell me step by step your […]
Fokke van Saane answered a question 1 week, 1 day ago
Maybe the start time or frame rate of the Resolve project is the issue? (just guessing)
What happens if you export an FCP7 xml?
Fokke van Saane answered a question 1 month ago
I’ve once seen a photo, taken with an DSLR with a short shutter time, of, i think, five or six timecode slates by different brands. iPads, iPhones, […]
Fokke van Saane answered a question 1 month, 1 week ago
Tentacle Support is not often on this forum; it is a users-helping-users forum. I am often here, but although i did some Premiere editing, i am not […]
How handy it would have been if the SyncE could supply the power for the mic by himself.
From the manual:
The built-in microphone can only be used, when working at mic levels with plugin power switched on at camera side.
Is this a question for the Tentacle Forum or for a XC10 forum?
I don’t know the XC10 at all. i just googled it.
The tip of the 3.5mm plug on the […]
Fokke van Saane answered a question 1 month, 2 weeks ago
The tip of the 3.5 mm jack on the Tentacle is Timecode out and should be used to connect to the Zoom; that has “tip” for timecode input. The “ring” […]
I understand your issue.
If you don’t need the audio outside of the video boundaries you can export as synchronised files instead of an FCPXML. Yes, […]
Timecode (LTC) is not white noise. But i agree it is not a pleasant sound.
The Zoom has no dedicated TC input, so you have to use an audio track to […]
The input of the TrackE is unbalanced. You have to make an unbalanced cable, and then it works. Pin 1 and 3 of the XLR as sleeve, XLR pin 2 to the 3.5mm tip.
The camera has no dedicated timecode input. But you can connect the tentacle to an audio track of the camera and later using Tentacle Sync Studio […]
Fokke van Saane answered a question 1 month, 3 weeks ago
I think just the info@ adress will work
Just drop the whole folder(s) you made with ShotputPro onto Tentacle Sync Studio (mac only). It will load all the video files and audio files that […]
This forum is mainly a user helps other user, the Tentacle Team is around here sometimes, but not very frequent. Better write them an email.
Fokke van Saane answered a question 2 months, 1 week ago
“No Audio TC found” is correct for your MixPre files; it is File TC that you use on that machine.
I don’t know about the current Toolshed version, but when i tested the syncing program from Toolshed a few years ago i found two major downsides for […]
Fokke van Saane answered a question 2 months, 2 weeks ago
I meant splitting the timecode just as a test. So if you split it to three you can test.
But if you think this is not a tentacle problem, and i […]
A screen is not a good way to check sync. Sorry. It can have latency.
I still suggest to connect the TC to the camera’s using cables and splitters […]
Yes, if you connect timecode to the camera using the BNC in, the camera will record the timecode in the file.
If you ALSO record it on an audio […]