The time code synchronized to the camera does not appear.
I am using several panasonic lumix DC-BGH1 cameras.
The settings of the DC-BGH1 camera are as follows.
– System Frequency : 59.94Hz(NTSC)
– Rec Quality : 1920×1080, 29.97p
– SDI output resolution : 1080p
And the multi-camera system configuration is as shown in the figure.
(Tentacle and camera are connected using BNC connector.)
The camera’s time code setting is set to FREE RUN, NDF, and TC IN.
When recording a camera with this configuration, the timecode does not match.
Am I testing the wrong way?
I want to know which part of the problem is occurring.
(When testing with another camera, Panasonic AG-HPX255EN with the same configuration,
We confirmed that the timecode matches exactly.)
Video recording of two cameras was simultaneously recorded using the “LUMIX Tether for Multicam” program by connecting the Ethernet line.
(However, as a result of checking File-TC, there was a difference of 1 frame.)
The TC value was confirmed through Premiere Pro.
If the TC was matched the same, the recorded screen was the same.
(If you set the TC of the right cam to 35:15, It is the same as the screen on the left cam.)
However, I can’t understand that the timecode is wrong in the gridview I posted in the question.
(In other cameras, gridview also shows the same timecode on the same screen)