The time code synchronized to the camera does not appear.

469 viewsHardwaretentacle sync device

I am using several panasonic lumix DC-BGH1 cameras.

The settings of the DC-BGH1 camera are as follows.
– System Frequency : 59.94Hz(NTSC)
– Rec Quality : 1920×1080, 29.97p
– SDI output resolution : 1080p

And the multi-camera system configuration is as shown in the figure.

(Tentacle and camera are connected using BNC connector.)

The camera’s time code setting is set to FREE RUN, NDF, and TC IN.

When recording a camera with this configuration, the timecode does not match.

Am I testing the wrong way?

I want to know which part of the problem is occurring.

(When testing with another camera, Panasonic AG-HPX255EN with the same configuration,
We confirmed that the timecode matches exactly.)

Answered question

The frame rate of multiple cameras and Tentacle is the same with 29.97 settings.

I tried inputting the timecode from one Tentacle sync E to two cameras using the BNC T connector.
However, the timecode is still displayed incorrectly.

Can I think that there is no problem with the Tentacle sync E?
Probably, the camera I use is a recently released camera,
so it may be a compatibility problem between Tentacle and the camera.

Answered question
You are viewing 1 out of 16 answers, click here to view all answers.