The time code synchronized to the camera does not appear.

9.85K viewsHardwaretentacle sync device

I am using several panasonic lumix DC-BGH1 cameras.

The settings of the DC-BGH1 camera are as follows.
– System Frequency : 59.94Hz(NTSC)
– Rec Quality : 1920×1080, 29.97p
– SDI output resolution : 1080p

And the multi-camera system configuration is as shown in the figure.

(Tentacle and camera are connected using BNC connector.)

The camera’s time code setting is set to FREE RUN, NDF, and TC IN.

When recording a camera with this configuration, the timecode does not match.

Am I testing the wrong way?

I want to know which part of the problem is occurring.

(When testing with another camera, Panasonic AG-HPX255EN with the same configuration,
We confirmed that the timecode matches exactly.)

Answered question

Sorry (T^T), I didn’t understand the answer well because I didn’t have basic knowledge about TC and video.

Insert the TC into the camera using a BNC cable,
Do you mean that if you record in this state, TC is recorded in the .mov file?
(The camera is saved in .mp4 or .mov format)

Or can I test it by referring to the TSS Tutorial video?

Answered question
You are viewing 1 out of 16 answers, click here to view all answers.