Tentacle sync to denecke slate

Question

17.73K viewsSeptember 17, 2021Hardwaredenecke

tonisevero Posted October 29, 2016

Dear Tentacle Sync,

I am about to purchased a couple of boxes. Beside jamming to dslr and cameras, it is possibile to jam also electronic slates such as denecke slate from one tentacle sync? I meant with a proper cable (1/8 to 1/4 hrs) ?

I just want to be sure

Thank you
Antonio

James Levine Answered question September 17, 2021

10 Answers

James Levine · Answer 1 · 2021-09-17T16:28:26+00:00

Why are you getting any drift if you are using the TS as master? In other words, why are you still jamming if you have a dedicated unit on the slate?

score 0 · Answer 2 · 2017-04-16T02:45:28+00:00

Aren’t you assuming that it is the TS3 that is a few frames slower, could the Tentacle not be a few frames faster?

What are you using as a control?

Unfortunately taking photo’s is not a definitive test and results can vary enormously.

The only way to be sure is to use either a Timecode Master Unit like the Ambient Clockit Controller or something like the compare feature on the Sound Devices 6 Series Recorders.

score 0 · Answer 3 · 2016-11-22T15:02:18+00:00

OK , here comes Denecke TS3 internal TC vs. Tentacle TC:

Today I started the Denecke jammed to Tentacle, 25fps, room temperature.

Direct test was 0frames off (perfect!) at 00:00:00:00

1h:20min (total) TS3 was offset 1 frame (slower than Tentacle)

5h:30min (total) TS3 was offset 3 frames (slower than Tentacle)

Rg. the price of a Tentacle its a good idea to spend a dedicated Tentacle directly to the TS3 for continous jamming – otherwise better sync it every 1-2 hrs.

score 0 · Answer 4 · 2016-11-17T15:27:00+00:00

0

Ulrich Mors Posted November 17, 2016 0 Comments

Fine with 2 Tentacles.

Ulrich Mors · Answer 5 · 2016-11-17T15:20:12+00:00

Short Result:

TS3 (tc 25fps) ran off internally 1 frame against Tentacle Unit after 4-6hrs.

Since the Tentacle is so small and energy efficient I´ll velcro one unit to the TS3 backside for production if necessary.

score 0 · Answer 6 · 2016-11-17T11:28:06+00:00

Hi,

I hooked up the denecke TS3 via Tentacle to XLR with an XLR/TRS Adapter (not needed if you go straight to TRS).

Works perfectly.

I am just testing how far the Denecke´s own TC runs away from the tentacle… Otherwise leave the Tentacle hooked up (dont forget to swith the TS3 to JAM then)

Uli

score 0 · Answer 7 · 2016-11-03T16:24:48+00:00

0

tonisevero Posted November 3, 2016 0 Comments

Thanks Ulrich,

Nice quote 🙂

Tentacle Support Ulrich · Answer 8 · 2016-11-02T19:04:32+00:00

Hi Antonio,

as the ts-3 has a mono 1/4 inch input, this cable will do the job: https://shop.tentaclesync.com/product/tentacle-to-63mm/

“They don’t call it a Quarter Pounder with Cheese? – No, they got the metric system there” ?

Best,
Ulrich

score 0 · Answer 9 · 2016-11-02T11:38:56+00:00

Thank you Ulrich,

one more thing, I can’t find the right cable for giving timecode from tentacle sync to denecke ts-3 electronic slate. Will be a normal mini trs to ts cable suitable for that?

Thanks!

Antonio

score 0 · Answer 10 · 2016-10-29T14:58:22+00:00

Hi Antonio,

Tentacle Sync does standard SMPTE 12M timecode, so it can be used together with any kind of professional timecode gear, like slates, cameras, sound-recorders and other competitors timecode products.

Best,
Ulrich

10 Answers

Categories